Bently 330102-00-15-10-01-05 | 3300XL 8mm Armored Eddy Current Probe
1、 Model segmentation definition (330102-AA-BB-CC-DD-EE)
330102: 8mm probe, 3/8-24UNF American thread, stainless steel armored integrated cable (330101 is non armored)
00: The probe has a non threaded section with a length of 0.0 inches, and the thread extends directly to the probe end face
15: Probe housing total length 1.5 inches (38.1mm) standard housing
10: The probe comes with a 1.0-meter coaxial cable for the outgoing line
01: Outgoing line without aviation connector, bare wire outgoing line (02=standard ClickLoc connector)
05: Intrinsic safety explosion-proof Ex ia IIC T4 (ATEX/IECEx/CSA explosion-proof certification, dedicated for explosion-proof areas)
2、 Complete length matching (compatible with your previous accessories)
Probe comes with 1m+330130-040-03-05 extension cable 4m=5m for the entire system
Perfect adaptation: 330180-51-05 (5-meter DIN preamplifier), the entire 5-meter system does not require recalibration

3、 Electrical core parameters (8mm standard)
table
Project parameters
Sensitivity 7.87V/mm (200mV/mil)
Linear range 0-2mm, installation gap standard 2.5mm
Frequency response 0-10kHz, measuring shaft vibration/shaft displacement/key phase
Working temperature -35 ℃~+177 ℃
Power supply supporting preamplifier -17.5~-26VDC power supply
Implement standard API670 Petrochemical Unit Specification
4、 Structural characteristics
Cable: Outer stainless steel braided armor, resistant to rolling and oil stains, preferred for harsh working conditions in compressor/turbine compartments
Thread: 3/8-24 UNF, standard 5/16 inch wrench installation position
Outgoing line: 01 bare wire, on-site self pressure connector available
5、 Application&Supply
Application scenarios: Coal chemical reciprocating/centrifugal compressors, steam turbine unit shaft vibration, axial displacement monitoring, connected to 3500/42M, 3500/45M card TSI system