Bently Nevada 330103-00-05-10-11-00 8mm Eddy Current Shaft Vibration Probe (XY Direction Monitoring Universal)
1、 Complete analysis of model segmentation
330103-00-05-10-11-00
330103:3300 XL 8mm standard eddy current probe, M10 × 1 thread, non armored cable, used for radial XY axis vibration/axis displacement measurement
00: The length of the non threaded section at the front end of the probe is 0mm
05: The total length of the probe housing is 50mm (short housing, narrow bearing seat installation)
10: The probe comes with an integrated cable with a length of 1.0m
11: ClickLoc miniature coaxial protective connector, explosion-proof certified configuration
00: Basic Standard Certification Version

2、 Core technical parameters (XY axis vibration measurement)
Probe diameter: 8mm
Linear measurement range: 0.25~2.3mm (10~90mils), linear range 2mm
Sensitivity: 7.87 V/mm (200 mV/mil)
Recommended installation gap: 1.27mm (50mils)
Frequency response: 0~10kHz, suitable for XY radial vibration monitoring of steam turbines and compressors
Working temperature: -52 ℃~+177 ℃
Execution standards: API 670 Rotating Machinery Protection Standard, CE Explosion proof Certification Bentley
Minimum tested shaft diameter: 50.8mm (2 inches), XY dual probe installation spacing ≥ 38mm to prevent crosstalk
3、 Origin, weight, and size
Origin: USA (Bently factory produced)
Net weight (single probe with 1m cable): 0.32kg
Original cardboard box packaging gross weight: approximately 0.4kg
Probe body size: Φ 8mm, shell length 50mm; total cable length 1m
4、 Supporting system (XY vibration monitoring complete set)
A complete monitoring circuit needs to be composed of a preamplifier of the same length and an extension cable
Common preamplifiers: 330180-50-00 (5m system), 330180-90-00 (9m system)
Extension cable: 330130 series, the total length of probe cable and extension cable must match the calibration of the preamplifier
Monitoring framework: 3500/3300 monitor, dual channel acquisition of X/Y axis vibration signals

5、 Supply and substitution instructions
The original factory has not stopped production, and the standard delivery time is 8-10 weeks; There is original inventory in stock on the market
There is no complete direct replacement model, and the same series only distinguishes between shell length and cable length. Changing the model requires recalibration of the gap
Warranty: Brand new original 12 months
Applicable scenarios
Monitoring of XY bidirectional shaft vibration, shaft displacement, and key phase speed for power plant steam turbine generators, air compressors, centrifugal compressors, and large fans.